Features and usage
1.This series product is the two-component, rapid molding liquid silicone rubber..
2. It is non-toxic, odorless, waterproof, weather-resistance.
3. Non-corrosive with great transparency, mould size stability.
4.Good demoulding character.
Use-Method
l. Mixture: Mix up the A,B component in the proportion of 1:1. It can be manually stirred or mixed by equipment.
2. Defoaming: The mixed rubber should be deaerated in vacuum. It will be finished (in about 10 minutes) until there is no bubble on the surface. If a small amount of rubber is used, operate it in the vacuum dryer.
3. Molding: Put the mixed material after defoaming into the mould and cure it for 2-3 hours at normal temperature; it takes 30 minutes to cure when it is heated to 120℃.The curing temperature and time are based on the technical condition.
